BP1 COLD

Liquid paraffin for training and sports use in any type of snow from -22° to -8°C. For competitive use, it should be used with humidity <40%. Recommended cold application with a cork pad and brush.

GENERAL PRINCIPLES

The application of hydrocarbon paraffins (Med or Soft Racing Base or BP1), fluorinated hydrocarbon paraffins (LP2 or HP3) and perfluorinated waxes FP4 allows certain overlaps based on the following chemical affinities:
Hydrocarbon paraffin alone (Med or Soft Racing Base or BP1) or mixed with other hydrocarbon paraffins;
Fluorinated hydrocarbon paraffin alone (LP2 or HP3) or mixed with other hydrocarbon paraffins;
Perfluorinated wax FP4 alone or mixed with other perfluorinated waxes but in any case superimposed on a fluorinated hydrocarbon paraffin (LP2 or HP3).
The direction in waxing operations must always be from the tip to the tail of the tool.
Racing waxing can be done hot or cold depending on the physical state of the products and the experience of the skiman.

COLD APPLICATION METHODOLOGY WITH CORK PAD AND BRUSH

• Spread the wax with a brush or drip it onto the base for about 15 cm;
• Allow the still liquid wax to penetrate the dispensing area by rubbing and pressing with a manual cork pad and repeat the operations along the entire base (the MT0111 cork/brush is useful);
• Wait at least 15 minutes to allow the wax to solidify;
• Free the side of the ski and the lateral face of the edges from the solidified paraffin with the plexiglass spatula;
• Brush the insole forward and backward, applying pressure with a stiff nylon hand brush;
• Brush the impression with a manual or rotating brush made of stiff hair;
• Polish the impression with a manual or rotating soft nylon brush.