BP10 RED

Solid paraffin for training and sports use. Suitable for snow temperatures from -9° to -3°C. It is an excellent product for protecting racing bases and can be used as a universal base for racing and training. For competitive use, it should be used with humidity <50%. Apply hot with a waxing iron.

GENERAL PRINCIPLES

The application of hydrocarbon paraffins (Racing Base or BP10), fluorinated hydrocarbon paraffins (LP15, LP2 or HP3) and perfluorinated waxes FP4 allows certain overlaps based on the following chemical affinities:
Hydrocarbon paraffin alone or mixed with other hydrocarbon paraffins;
Fluorinated hydrocarbon paraffin alone or mixed with other hydrocarbon paraffins;
Perfluorinated wax FP4 alone or mixed with other perfluorinated waxes but in any case superimposed on a fluorinated or highly fluorinated hydrocarbon paraffin (LP2 or HP3).
The direction in waxing operations must always be from the tip to the tail of the tool.

Racing waxing can be done hot or cold depending on the physical state of the products and the experience of the skiman.

APPLICATION METHOD WITH WAXING IRON

• Drip the paraffin block onto the base by placing it in contact with the base of the waxing iron at a temperature of 130°C.
• Then spread the wax with a regular forward and backward movement and finally perform a continuous pass from tip to tail at a constant speed (approximately 4 cm per second).
• Wait at least 15 minutes to allow the wax to solidify and the base to cool;
• Remove excess wax with a sharp plexiglass spatula, applying little pressure;
• Free the side of the ski and the lateral face of the edges from solidified paraffin;
• Free the imprint with a stiff nylon hand brush;
• Brush the impression with a manual or rotating brush made of stiff hair;
• Polish the impression with a manual or rotating soft nylon brush.